View SGM3736_9004005.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SGM3736 pwm dimming, 38v step-up led driver rev. a. 3 sg micro corp www.sg-micro.com general description the SGM3736 is a versatile constant current led driver with a high efficiency step-up converter architecture. the low-side power mosfet is integrated in the device, significantly shrinking the overall pcb layout area and minimizing the total number of external components. unique technology and high 1.35a current limit allow SGM3736 to drive up to 38v output (10 leds in series). alternatively, SGM3736 can deliver 260ma total current with 3 series leds per string. it can also maximize the current capability while achieving high conversion efficiency. the optimized 1.1mhz switching frequency results in reduced conduction loss and small external component size. digital pwm dimming interface is integrated to adjust led current. the pwm frequency is in the range from 2khz to 60khz. various protection features ar e built into the SGM3736, including cycle-by-cycle input current limit protection, open led (output over-volt age) protection and thermal shutdown protection. the leakage current in shutdown mode is less than 1a. the SGM3736 is available in green tdfn-22-8l package. it operates over an ambient temperature range of -40 to +85 . features wide output range: up to 10 series leds integrated 40v high current switch (1.35a limit) 2.7v to 5.5v input voltage range high efficiency pwm converter low 200mv feedback voltage 500k ? pull-down resistor on en/pwm pin 2khz to 60khz pwm dimming frequency 38v open led protection 1.1mhz switching frequency integrated soft-start function less than 1a shutdown current simple, small solution size available in green tdfn-22-8l package -40 to +85 operating temperature range applications led backlighting mobile phones handheld devices digital photo frames automotive navigation a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 2 sg micro corp www.sg-micro.com package/ordering information model package description specified temperature range ordering number package marking packing option SGM3736 tdfn-22-8l -40 to +85 SGM3736ytde8g/tr-v1 3736 xxxx tape and reel, 3000 note: xxxx = date code. green (rohs & hsf): sg micro corp defines "green" to mean pb-free (r ohs compatible) and free of halogen substances. if you have additional comments or questions, please contact your sgmicro r epresentative directly. absolute maximum ratings input voltage, v in ................................................. -0.3v to 6v high voltage nodes, sw, vout ....................... -0.3 v to 40v other pins, fb, en /pwm..........................-0.3v to v in + 0.3v package thermal resistance tdfn-22-8l, ja ...................................................... 75 /w junction tem peratur e ...................................................150 storage temperatur e range ........................-65 to +150 lead temperature (soldering, 10s ec) ..........................260 esd susceptibility hbm............................................................................. 3000v mm................................................................................. 200v recommended operating conditions input voltage range ...........................................2.7v to 5.5v operating temperat ure range .......................-40 to +85 overstress caution stresses beyond those listed may cause permanent damage to the device. functional operat ion of the device at these or any other conditions beyond those indicated in the operational section of the spec ification is not implied. exposure to absolute maximum rating conditions for extended periods may affect reliability. esd sensitivity caution this integrated circuit can be damaged by esd if you don?t pay attention to esd protecti on. sgmicro recommends that all integrated circuits be handled with appropriate precautions. failure to observe proper handling and installation procedures can cause damage. esd damage can range from subtle performance degradation to complete device failure. precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet it s published specifications. disclaimer sg micro corp reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 3 pin configuration (top view) pgnd sw vout fb rset en/pwm gnd vin 8 7 6 5 1 2 3 4 gnd tdfn-22-8l pin description pin name function 1 pgnd power ground. 2 vin supply input. 3 en/pwm enable control and pwm dimming input. it is a multi-functional pin which can be used for enable control and digital pwm dimming. 4 gnd ground. 5 rset rset pin. connect one resistor from rset pin to gnd to program the maximum white led current. 6 fb feedback input. connect this pin to the cathode of the white led. 7 vout output and over-voltage protection pin. 8 sw switch output. connect this pi n to the inductor and the schottky diode. exposed pad gnd exposed pad should be soldered to pcb board and connected to gnd. typical application vin en/pwm pgnd fb vout d1 c out input range 2.7v~5.5v c in SGM3736 l sw white leds up to 10 in series or up to 10s4p up to 38v output pwm dimming 8 2 1 7 6 3 rset 5 r set 1k gnd 4 figure 1. typical application circuit sg micro corp www . sg-micro.com a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 4 sg micro corp www.sg-micro.com electrical characteristics (1) (v in = 3.6v, l = 10 h, c in = 10 f, c out = 0.47 f, full = -40 to +85 , typical values are at t a = +25 , unless otherwise noted.) parameter symbol conditions temp min typ max units ic supply input voltage range v in full 2.7 5.5 v input under-voltage locko ut uvlo rising edge +25 2.5 2.6 v uvlo hysteresis v hys +25 0.15 v quiescent current (non switching) v fb = 0.4v +25 0.20 0.35 ma operating current (switching) i q v fb = 0v +25 0.72 1.5 ma vin pin shutdown current i shdn v en = 0v +25 0.1 1 a step-up converter voltage feedback regulation voltage v ref full 192 200 212.5 mv voltage feedback regulation voltage under brightness control v ref_pwm f pwm = 10khz, duty cycle = 3% +25 3.5 6 8.5 mv v ref filter 3db frequency f ref(3db) +25 600 hz sw pin leakage current i sw +25 0.01 1 a peak nmos current limit i lim +25 1.35 a oscillator frequency f s full 0.90 1.10 1.4 mhz over-voltage threshold v ovp measured at vout pin full 35.5 38.0 40.5 v start-up time t s +25 800 s control logic low threshold v il full 0.35 v logic high threshold v ih full 1.5 v pwm dimming frequency range dfr +25 2 60 khz minimum shutdown pulse width timing t off +25 3 ms junction thermal shutdown threshold 150 junction thermal shutdown hysteresis 15 note: 1. the SGM3736 is guarante ed to meet performance spec ifications over the -40 to +85 operating temperature range by design, characterization and correlation with statistical process controls. a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 5 recommended components of test circuits component component 22 h/cd75np-220kc 10 f/c2012x7r1h106kt inductor 10 h/cd75np-100kc 0.47 f/c2012x7r1h474kt diode mbr0540 capacitor typical performance characteristics t a = +25 , l = 10 h, c in = 10 f, c out = 0.47 f, unless otherwise noted. switching waveform open led protection v sw v out i l 20v/div 200mv/div 200ma/div v fb v out i l 200mv/div 10v/div 500ma/div time (1 s/div) time (100 s/div) start-up output ripple at pwm dimming v en v out i l 2v/div 10v/div 200ma/div pwm v out i led 2v/div 200mv/div 10ma/div time (1 ms/div) time (100 s/div) ac coupled v in = 3.6v, i led = 20ma, l=10 h, 8 leds v in = 3.6v, i led = 20ma, l = 10 h, 8 leds ac coupled v in = 3.6v, i led = 20ma, f pwm = 10khz, 8 leds v in = 3.6v, i led = 20ma, l = 10 h, 8 leds sg micro corp www.sg-micro.com a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 6 typical performance characteristics t a = +25 , l = 10 h, c in = 10 f, c out = 0.47 f, unless otherwise noted. feedback voltage vs. temperature feedback voltage vs. input voltage 185 190 195 200 205 210 215 -50 -25 0 25 50 75 100 temperature ( ) feedback voltage (mv) v in =3.6v, d pwm = 100% 185 190 195 200 205 210 215 2.5 3 3.5 4 4.5 5 5.5 input voltage (v) feedback voltage (mv) d pwm = 100% efficiency vs. input voltage efficiency vs. input voltage 70 74 78 82 86 90 2.5 3 3.5 4 4.5 5 5.5 input voltage (v) efficiency (%) 10 leds (32v) i led = 20ma, l = 10 h 70 74 78 82 86 90 2.533.544.555.5 input voltage (v) efficiency (%) 10 leds (32v) i led = 20ma, l = 22 h efficiency vs. output current led current vs. pwm duty cycle 60 65 70 75 80 85 90 0 5 10 15 20 25 30 output current (ma) efficiency (%) 10 leds (32v) v in = 3.6v, l = 10 h 0 3 6 9 12 15 18 21 24 0 20 40 60 80 100 pwm duty cycle (%) led current (ma) f pwm = 2khz v in = 3.6v, i led = 20ma, l = 10 h, 6 leds f pwm = 20khz sg micro corp www.sg-micro.com a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 7 functional block diagram voltage reference and pwm dimming control pwm control and gate drive thermal shutdown over-voltage protection ramp generator oscillator current limit input logic and dac current sense fb en/pwm sw vout vin v in current sense SGM3736 500k pull-down resistor v ref led current control rset comp gm pgnd gnd figure 2. SGM3736 block diagram functional description the SGM3736 uses a constant-frequency current-mode boost converter architecture to control the led current by regulat ing the feedback voltage. please refer to the functional block diagram above for an explanation of SGM3736 operation. the beginning of each cycle turns on the power mosfet. a slope compensation ramp is added to the output of the current sense amplifier and the result is fed into the positive input of the comparator (comp). when this voltage goes above the output voltage of the error amplifier (gm), the power mosfet is turned off. the voltage at the output of the gm block amplifies the difference between the reference voltage and the feedback voltage (fb), so that fb voltage can be regulated to the reference voltage. sg micro corp www.sg-micro.com the sgm373 6 has built-in soft-start to limit the inrush current during startup and to limit the amount of overshoot on the output. protection features in the SGM3736 include over-voltage protection (ovp), cycle-by-cycle current limit protection and thermal shutdown. ovp protects in the event where an led fails open, which forces the feedback voltage to zero. this causes the boost converter to operate in maximum duty cycle mode, ramping up the output voltage. switching will stop when the output reaches the ovp threshold. the ovp feature protects the ic from damaging itself by exceeding the voltage rating on sw/vout pins. for the brightness dimming control of the SGM3736, the ic provides typically 200mv feedback voltage when the en/pwm pin is pulled co nstantly high. however, en/pwm pin allows a pwm signal to reduce this regulation voltage by changing the pwm duty cycle to achieve led brightness dimming control. an internal low pass filter (600hz) is used to filter the pulse signal. the relationship between the duty cycle and fb voltage can be calculated as following equation. v fb = duty 200mv where: duty = duty cycle of the pwm signal 200mv = internal reference voltage the pwm frequency is in t he range from 2khz to 60khz, and the recommended minimum pwm duty cycle is 3% for no blind dimming. a ll data sheet.com
SGM3736 pwm dimming, 38v step-up led driver 8 application information inductor selection a 6.8 h to 22 h inductor is recommended for 10/8/6 series led applications and 10s4p led applications. if high efficiency is a critical requirement, a low dcr inductor should be selected. the inductor?s saturation current rating should also exceed the peak input current, especially for high load current application (like 10s4p). capacitor selection small size ceramic capacitors are ideal for SGM3736 application. an input capacitor in the range of 1 f to 22f and a 0.47 f output capacitor are suggested for 10/8/6 series led applications. for higher output current applications like 10s4p, larger value output capacitors like 2.2 f are recommended to minimize output ripple. sg micro corp www.sg-micro.com diode selection the current rating of the schottky diode should exceed the peak current of the boos t converter. the voltage rating should also exceed the target output voltage. led maximum current setting led maximum current setting, i max , is determined by the feedback resistor (r set in figure 3). the feedback voltage is internally set at 200mv when the pwm dimming duty cycle = 100% . the led current is programmed according to the formula i max = 200mv/r set . for accurate led current settings, precision 1% resistors are recommended. the formula and table for r set selection are shown below. r set = 200mv/i max table 1. current setting resistor r set ( ? ) i max current (ma) 200 1 40.2 5 20.0 10 13.3 15 10.0 20 6.65 30 2.00 100 layout considerations pcb layout is very important for high frequency switching regulators in order to keep the loop stable and minimize noise. the input capacitor should be very close to the ic to get the best decoupling. the path of the inductor and output capacitor should be kept as short as possible to minimize noise and ringing. vin en/pwm pgnd fb vout d1 c out 0.47 f input power 2.7v~30v c in 22 f SGM3736 l sw 20ma 10-series white leds 8 2 1 7 3 6 bias voltage 2.7v~5.5v c 1 0.1 f 10 h pwm dimming 1k r set 10 rset 5 gnd 4 figure 3. application circuit for 10 leds in series with 20ma current (vin can be tied to input power rail if less than 5.5v) a ll data sheet.com
package information tx00056.000 sg micro corp www.sg-micro.com package outline dimensions tdfn-22-8l recommended land pattern (unit: mm) 0.50 0.24 1.20 0.60 l a1 a2 a n8 n1 n4 k e d1 e1 b e d side view bottom view top view 1.95 0.65 dimensions in millimeters dimensions in inches symbol min max min max a 0.700 0.800 0.028 0.031 a1 0.000 0.050 0.000 0.002 a2 0.203 ref 0.008 ref d 1.900 2.100 0.075 0.083 d1 1.100 1.300 0.043 0.051 e 1.900 2.100 0.075 0.083 e1 0.500 0.700 0.020 0.028 k 0.200 min 0.008 min b 0.180 0.300 0.007 0.012 e 0.500 typ 0.020 typ l 0.250 0.450 0.010 0.018 a ll data sheet.com
package information tx10000.000 sg micro corp www.sg-micro.com tape and reel information note: the picture is only for reference. pl ease make the object as the standard. key parameter list of tape and reel package type reel diameter reel width w1 (mm) a0 (mm) b0 (mm) k0 (mm) p0 (mm) p1 (mm) p2 (mm) w (mm) pin1 quadrant tdfn-22-8l 7 9.5 2.30 2.30 1.10 4. 00 4.00 2.00 8.00 q1 dd0001 reel width (w1) reel diameter reel dimensions tape dimensions direction of feed p2 p0 w p1 a0 k0 b0 q1 q2 q4 q3 q3 q4 q2 q1 q3 q4 q2 q1 a ll data sheet.com
package information tx20000.000 sg micro corp www.sg-micro.com carton box dimensions note: the picture is only for reference. pl ease make the object as the standard. key parameter list of carton box reel type length (mm) width (mm) height (mm) pizza/carton 7 (option) 368 227 224 8 7 442 410 224 18 dd0002 a ll data sheet.com

▲Up To Search▲

Price & Availability of SGM3736

	To Download SGM3736 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .